UP Board Class 10 Plumbing (Plumber) Syllabus 2026-27

English names, titles, labels and glosses on this page are our transliteration or translation of the PDF's Hindi.
The UP Board Class 10 Plumbing syllabus 2026-27 (the PDF calls the subject प्लम्बर, Plumber) is a vocational subject with 6 units, from pipe joints and plumber's tools to sanitary fitting and masonry. The theory syllabus is out of 70 marks and the practical work out of 30, and there are 30 marks of internal assessment at your school. The Plumbing exam is on Wednesday 10 February 2027 (evening shift), in one slot shared by all 10 vocational trades.
Below you will find the syllabus at a glance, unit-wise marks with topics, the complete official syllabus in Hindi with English, the 15 practical tasks, the internal assessment with its four unit tests, the 9 books and the 67-item tools list, and tips to prepare.
UP Board Class 10 Plumbing at a glance
Detail | Information |
Board | UP Board (UPMSP, Uttar Pradesh Madhyamik Shiksha Parishad), High School |
Session | 2026-27 (board exam in 2027) |
Subject name in the PDF | प्लम्बर (Plumber) |
Theory syllabus | 70 marks (सैद्धांतिक पाठ्यक्रम, पूर्णांक 70) |
Practical work | 30 marks (प्रयोगात्मक कार्य, पूर्णांक 30); 15 tasks, no marks per task |
Internal assessment | 30 marks: 10 in August (practical and project work), 10 in December (practical and project work) and 10 from four unit tests |
Total | The PDF prints the three figures above separately and does not print a combined total or say how the practical's 30 relates to the internal assessment's 30 |
Units | 6 units |
Highest-mark units | Plumber's Tools and Equipment and Different Kinds of Plumbing Processes, 15 marks each |
Unit tests | 4 tests of 20 marks each; their total is converted to 10 marks |
Books | 9 books listed |
Tools and equipment | 67 items listed (printed in English) |
Board exam date | Wednesday 10 February 2027, evening shift, 2:00 to 5:15 pm (one slot for all 10 vocational trades) |
Official syllabus language | Hindi, with the tools list and one book printed in English; full text below, with English |
Unit-wise marks and topics
Unit and marks | Topics |
Unit 1: Pipe Joints (पाइप ज्वाइंट), 8 marks | Flange, spigot and socket, collar, flexible and expansion joints: build, use, identification and how to make them |
Unit 2: Plumber's Tools and Equipment (प्लंबर के औजार एवं उपकरण), 15 marks | Holding, marking, cutting, heating and measuring tools, grinder and soldering iron: build, use, identification, care and safety |
Unit 3: Different Kinds of Plumbing Processes (प्लंबिंग के विभिन्न प्रकार प्रक्रम), 15 marks | Measuring, cutting, bending and threading pipe; pipe layout; fitting toilets, bathrooms and kitchens; faults and their causes; sewage disposal |
Unit 4: Repair and Maintenance (मरम्मत एवं अनुरक्षण), 12 marks | Breakage and corrosion; repair; replacing flanges and tap washers; care of sanitary goods; setting up a repair shop |
Unit 5: Sanitary Fitting and Sanitation (सेनेटरी फिटिंग एवं सैनिटेशन), 13 marks | Sinks, bath tubs, wash basins, flushing systems, cisterns, closets; traps, bends, soil pipes, manholes, chambers, urinals; sanitation |
Unit 6: Masonry (राजगिरी), 7 marks (printed 07) | Masonry tools, building materials, cement mortar, brickwork, filling concrete |
Theory total | 70 marks |
Practical work | 30 marks |
Complete syllabus, unit by unit
Below, each unit gives the topics in English first, then the official Hindi text exactly as printed.
शैक्षिक सत्र-2026-27, विषय- प्लम्बर, कक्षा-10
Session 2026-27, Subject: Plumber, Class 10.
Aims and job openings (printed before the units)
Aims (उद्देश्य): to tell students about the importance and usefulness of the plumbing trade; the basic process of plumbing work and choosing materials; safety and precautions; to build interest in the trade; and to develop entrepreneurial qualities and encourage self-employment.
Job openings (रोजगार के अवसर): work as a plumber or pipe fitter; self-employment or work as a नलकार (tap and pipe worker); work as a seller of pipes, pipe fittings and sanitary fittings; work as an erector at petrol pumps and in fuel supply systems; work as a tubewell operator.
Official text (Hindi):
उद्देश्य-
छात्रों को प्लंबिंग ट्रेड के महत्व एवं उपयोगिता की जानकारी देना।
छात्रों को प्लंबिंग कार्यों के निष्पादन की मूल प्रक्रिया और सामाग्री चयन की जानकारी देना।
छात्रों को सुरक्षा एवं सावधानियों की जानकारी देना।
छात्रों में व्यवसाय के प्रति रूचि पैदा करना।
छात्रों में उद्मियता गुणों का विकास करना एवं उन्हें स्वरोजगार की ओर प्रेरित करना।
रोजगार के अवसर-
प्लम्बर/पाइप फिटर के रूप में रोजगार।
स्वतः रोजगार या नलकार के रूप में कार्य करना।
पाइप और पाइप फिटिंग एवं सैनिटरी फिटिंग के विक्रेता के रूप में कार्य करना।
पेट्रोल पम्प, इंधन आपूर्ति प्रणाली में इरेक्टर के रूप में कार्य करना।
ट्यूबवेल ऑपरेटर के रूप में कार्य करना।
प्लम्बर, सैद्धांतिक पाठ्यक्रम, पूर्णांक 70
Plumber, theory syllabus, maximum marks 70.
Unit 1: Pipe Joints (8 marks)
इकाई 1. पाइप ज्वाइंट-
Knowing the different kinds of pipe joints: flange joint, spigot and socket joint (printed स्पिगोअ), collar joint, flexible joint, expansion joint and so on.
Their build, use and identification, and how to make the joints.
Official text (Hindi):
विभिन्न प्रकार के पाइप जोड़ की जानकारी- फ्लैंज जोड़ स्पिगोअ एवं सॉकेट जोड़, कॉलर जोड़, लचीला जोड़, प्रसार जोड़ आदि की बनावट, उपयोग एवं पहचान जोड़ बनाने की विधि।
Unit 2: Plumber's Tools and Equipment (15 marks)
इकाई 2. प्लंबर के औजार एवं उपकरण-
The build, use, identification and precautions of the plumber's different tools and equipment:
Holding tools: vice (वॉइस), pipe wrench, पट्टी, pliers (पिलास), work bench, spanner, Allen key, screwdriver (पेंचकस), marker (चिन्हक).
Cutting tools such as hacksaw (हेक्सा), pipe cutter, file (रेती), tap and die, drill, drilling machine, pipe bending machine.
Heating equipment such as flame torch, furnace (भट्टी) and so on.
Measuring tools such as steel rule, square, calliper, inch tape and so on.
Grinder and soldering iron: description, choice, identification and upkeep.
Official text (Hindi):
प्लंबर के विभिन्न प्रकार के औजार और उपकरणों की बनावट, उपयोग, पहचान, तथा सावधनियां- पकड़ने वाले औजार- वॉइस, पाइप रिंच, पट्टी, पिलास, कार्य बेंच, स्पानर, एलेन की, पेंचकस, चिन्हक, कर्तन औजार जैसे हेक्सा, पाइप कटर, रेती, टैप एवं डाई, ड्रिल, ड्रिलिंग मशीन, पाइप बंकन मशीन, हीटिंग उपकरण जैसे फ्लेम टॉर्च, भट्टी आदि, मापन औजार जैसे स्टील-रूल, स्क्वायर, कैलिपर, इंच टेप आदि, ग्राइंडर सोल्डरिंग आयरन का वर्णन, चयन, पहचान एवं रखरखाव की जानकारी।
Unit 3: Different Kinds of Plumbing Processes (15 marks)
इकाई 3. प्लंबिंग के विभिन्न प्रकार प्रक्रम-
Measuring, cutting and bending pipe, and cutting threads (चूड़ी) on it.
Making the pipe layout and laying pipe to match it.
The steps for fitting plumbing fixtures in the toilet, bathroom (printed बाथरूप) and kitchen.
A short account of likely faults, their causes and prevention.
A short account of sewage disposal arrangements.
Official text (Hindi):
पाइप को मापना, काटना, मोड़ना, उसमें चूड़ी बनाना, पाइप का विन्यास बनाना तथा उसके अनुसार पाइप बिछाना, शौचालय, बाथरूप, रसोई में प्लंबिंग उपस्कर लगाने के कार्य पद, संभावित दोष उनके कारण तथा बचाव की संक्षिप्त जानकारी, सीवेज डिस्पोजल की व्यवस्था की संक्षिप्त जानकारी।
Unit 4: Repair and Maintenance (12 marks)
इकाई 4. मरम्मत एवं अनुरक्षण-
Causes of breakage and corrosion; repair; preventing corrosion.
Cutting out a rusted flange and fitting a new flange.
Changing a tap washer.
Care, maintenance and repair of sanitary goods.
Setting up a repair shop.
Official text (Hindi):
टूट फूट एवं क्षरण के कारण, मरम्मत, क्षरण की रोकथाम, जंग लगे फ्लेंज को काटकर निकालना, नया फ्लैंज लगाना, टोंटी का वाशर बदलना, सैनिटरी सामानों की देखभाल तथा अनुरक्षण और मरम्मत। मरम्मत शॉप की स्थापना।
Unit 5: Sanitary Fitting and Sanitation (13 marks)
इकाई 5. सेनेटरी फिटिंग एवं सैनिटेशन
The build, use and installation of different sanitary fittings: sink, bath tub, wash basin, flushing system, cistern, closet (printed क्लोजेअ) and so on.
Trap, bend, soil pipe, manhole and chamber, and urinal.
The importance of sanitation, sanitation arrangements and keeping them clean.
Official text (Hindi):
विभिन्न प्रकार की सैनिटरी फिटिंग-सिंक, बाथ टब, वाशबेसिन, फ्लशिंग सिस्टम, सिस्टर्न, क्लोजेअ आदि की बनावट उपयोग तथा संस्थापन। ट्रैप, बेंड, सॉइल पाइप, मैन होल तथा चैंबर तथा यूरिनल । सेनिटेशन का महत्व, सैनिटेशन व्यवस्था एवं उसकी सफाई का वर्णन।
Unit 6: Masonry (7 marks)
इकाई 6. राजगिरी
Masonry tools, building materials, making cement mortar (सीमेंट मसाला), brick and stone work (चिनाई कार्य) and filling concrete.
Official text (Hindi):
राजगिरी के औजार, बिल्डिंग सामग्री, सीमेंट मसाला बनाना, चिनाई कार्य, कंक्रीट भरना।
UP Board Class 10 · 2026-27



Model papers and revision capsules
₹79a subject
Revision capsules ₹49
BUY 2, GET 1 FREE
See model papers and capsulesPractical work (30 marks as printed)
प्रयोगात्मक कार्य, पूर्णांक 30
The PDF prints 30 marks against the practical heading. Separately, it gives 30 marks of internal assessment, of which the August and December parts are based on practical and project work. The PDF does not say how these two 30s relate, and gives no marks for single tasks. It lists 14 numbered tasks and one more, unnumbered, after task 14.
Practise laying a pipeline for water supply and fitting a water meter in it.
जल आपूर्ति के लिए पाइपलाइन बिछाने का अभ्यास करना तथा उसमें वाटर मीटर लगाना।
Fit an RO in the kitchen and a wash basin in the bathroom.
रसोई में आरओ तथा बाथरूम में वास वेसिन फिट करना।
Fit a trap and shower in the bathroom and test them.
बाथरूम में ट्रैप एवं शावर लगाना तथा जांच करना।
Practise laying pipe for wiring.
वायरिंग के लिए पाइप बिछाने का अभ्यास।
Pipe fitting for an air conditioner.
एयर कंडीशनर के लिए पाइप फिटिंग करना।
Find faults in pipes and repair them.
पाइप की दोषों की पहचान करना तथा मरम्मत करना।
Sharpen tools.
औजारों में धार लगाना।
Remove an old fixture, repair it and fit it again.
पुरानी फिक्सचर को निकालना मरम्मत करना तथा फिर से लगाना।
Build an inspection chamber.
इंस्पेक्शन चेंबर का निर्माण करना।
Build a manhole gully trap.
मैनहोल गुली ट्रैप का निर्माण करना।
Connect the soil pipe to a WC (डब्लू सी).
डब्लू सी से सॉइल पाइप जोड़ना।
Connect pipes to a bath tub and basin, and repair them.
बाथ टब, बेसिन से पाइप जोड़ना तथा मरम्मत करना।
Install the main supply hydrant and sprinkler for fire.
फायर के लिए मेन सप्लाई हाइड्रेंट स्प्रिंकलर इंस्टॉल करना।
Repair leakage in a sanitary system.
सैनिटरी सिस्टम में लीकेज की मरम्मत करना।
Unnumbered, printed after task 14: Fitting a urinal.
यूरिनल कि फिटिंग करना।
Internal assessment (30 marks)
शैक्षिक सत्र 2026-27 हेतु आन्तरिक मूल्यांकन- 30 अंक
1-प्रथम आन्तरिक मूल्यांकन - (प्रयोगात्मक तथा प्रोजेक्ट कार्य) अगस्त माह 10 अंक
2-द्वितीय आन्तरिक मूल्यांकन -( प्रयोगात्मक तथा प्रोजेक्ट कार्य) दिसम्बर माह 10 अंक
3-तृतीय आन्तरिक मूल्यांकन-(चार यूनिट टेस्ट आधारित) 10 अंक
Internal assessment for the 2026-27 session is of 30 marks. The first (August) and the second (December) are each based on practical and project work. The third is based on four unit tests.
Internal assessment (आन्तरिक मूल्यांकन) | Marks |
1st: practical and project work (प्रयोगात्मक तथा प्रोजेक्ट कार्य), August (अगस्त माह) | 10 |
2nd: practical and project work (प्रयोगात्मक तथा प्रोजेक्ट कार्य), December (दिसम्बर माह) | 10 |
3rd: based on four unit tests (चार यूनिट टेस्ट आधारित) | 10 |
Total | 30 |
Unit tests (third internal assessment, 10 marks)
Unit test (यूनिट टेस्ट) | When and marks |
(i) प्रथम यूनिट टेस्ट (MCQ आधारित) (10 अंक ग्रीष्मावकाश गृहकार्य + 10 अंक यूनिट टेस्ट): 1st unit test, based on MCQs; 10 marks summer-vacation homework + 10 marks unit test | 2nd week of July (जुलाई द्वितीय सप्ताह), 20 marks |
(ii) द्वितीय यूनिट टेस्ट (वर्णनात्मक प्रश्न आधारित): 2nd unit test, based on descriptive questions | Last week of August (अगस्त अन्तिम सप्ताह), 20 marks |
(iii) तृतीय यूनिट टेस्ट (MCQ आधारित): 3rd unit test, based on MCQs | Last week of November (नवम्बर अन्तिम सप्ताह), 20 marks |
(iv) चतुर्थ यूनिट टेस्ट (वर्णनात्मक प्रश्न आधारित): 4th unit test, based on descriptive questions | Last week of December (दिसम्बर अन्तिम सप्ताह), 20 marks |
Total of all four, converted | 10 marks |
नोटः-चारों यूनिट टेस्ट के प्राप्तांकों के योग को 10 अंक में परिवर्तित किया जाय।
Note: the total of your marks in all four unit tests is converted to 10 marks. So in Plumbing, the unit tests count towards your internal assessment.
Books listed (पुस्तकों की सूची)
The PDF lists 9 books. Titles and authors are given exactly as printed.
कार्यशाला तकनीकि लेखक आर के लाल (Workshop technology, by R K Lal)
वर्कशॉप टेकनोलॉजी लेखक एस के हाजरा (Workshop technology, by S K Hajra)
वर्कशॉप ट्रेनिंग मैनुअल कैटप्शन पब्लिशर्स लुधियाना (Workshop training manual, Catption Publishers, Ludhiana)
Manual on workshop practice by K venkata Reddy New Delhi
वर्कशॉप टेक्नोलॉजी लेखकबीएस रघुवंशी (Workshop technology, by B S Raghuvanshi)
वर्कशॉप टेक्नोलॉजी लेखक एचएस बावा माग्रो हिल पब्लिशर्स न्यू दिल्ली (Workshop technology, by H S Bawa, McGraw Hill publishers, New Delhi; printed माग्रो हिल)
वर्कशाप इंजीनियरिंग लेखक मनीष सिसोदिया (Workshop engineering, by Manish Sisodiya)
सैनिटेशन इंजीनियरिंग लेखक मनीष सिसोदिया (Sanitation engineering, by Manish Sisodiya)
प्लंबिंग डिजाइन प्रैक्टिस लेखक एस जी देवल लिकर (Plumbing design practice, by S G Deval Likar)
Tools and equipment list (औजारों और उपकरणों की सूची)
The PDF lists 67 tools and pieces of equipment, printed in English. They are given here exactly as printed, including the PDF's own spellings (for example "Levl", "Still son", "Scre Driver", "Soldar", "Toll", "Rire", "Pedestagromder", "bech" and "voice").
Rule Steel 300 mm both in inch and mm
Rule Wooden 4 fold, 600 mm
Hacksaw Frame adjustable for 250 to 300 mm
Scriber 200 mm
Centre punch 100 mm
Chisel Cold, flat 20 mm
Hammer ball peen 800 grams
Hammer ball peen 50 grams
File flat rough 300 mm
Levl spirit wooden 300 mm
Plumb bob 50 grams
Trowel C-125-IS: 6013
Still son wrench 200 & 350 mm
Scre Driver 250 mm
Wooden Mallet small IS: 2022
Cutting pliers 200 mm IS: 3650
Steel tape (5m)
Surface plate 400×400 mm Grade
Marking Table 900×600×900 mm
'V' Blocks with clamps 80/7-63A IS 2949
Combination set 200 mm
Universal Scribing Block 300 mm
Hand Vice Jaw 50 mm
File flat Smooth 200 mm
File Half Round Rough 300 mm
File Square rough 250 mm
File Square Smooth 200 mm
File Triangular Rough 250 mm
Chisel Cold Flat 20 mm×300 mm
Chisel Cross Cut 6×150 mm IS-402
Top and tap wrench
Screw pitch gauge
Hand hacksaw frame 300 mm
Spanner monkey up to 50 mm
Soldar Iron and bit 5Nos
Pipe Cutter wheel type 6mmto 25mm
Snip Straight and bent 250 mm
Try square 200 mm
Inside and outside Calliper 150 mm
Tenon saw, Hand Saw
Mortise, Firmer Chisel 6mm,8mm,10mm,12mm,15mm,25mmEach
Mallet Medium IS: 2922
Blow lamp 500 millilitre
Scribing gauge
Soil pot with brush
D.E. Spanners 6mm to 32mm IS:2028
Bending Spring
Plumbers Ladle
Caulking Toll
Pipe Die and Die stock (1/4" to 2½") with complete set
Pipe vice up to 75 mm IS-2587
Still son pattern pipe wrenches 450 mm IS-4003
Chain pipe wrench 90mm-650 is 4123
Adjustable spanner 12" IS-6149
Pipe bender manually operated
Drill Twist (straight shank) 1.5 mm to 13mm
Wash Basin (16" ×14"×10")
Water closet (European type p) complete with over head cistern
Urinal wall type complete with automatic system
Water meter
Fire Extinguisher (CO2 and DCP)
Rire Buckets with stand
Pedestagromder machine
Leg vice 75mm jaw with Stand IS-2588
Hand drill machine up to 13mm capacity with drill chuck (Electric)
Working bech 2400×1200×750mm with 4 voice 125 mm jaws
Double face hammers.
UP Board Class 10 Plumbing exam date 2027
The UP Board Class 10 Plumbing paper (प्लम्बर) is on Wednesday 10 February 2027, in the evening shift, 2:00 to 5:15 pm (UPMSP exam programme, notice dated 12 October 2026). The timetable gives one slot to all 10 vocational trades together (Retail Trading, Security, Automobile, IT-ITeS, Health Care, Plumbing, Electrician, Disaster Management, Solar System Repair and Mobile Repairing).
How to prepare for UP Board Class 10 Plumbing
Joints and tools (Units 1 and 2, 23 marks)
Draw each pipe joint the syllabus names (flange, spigot and socket, collar, flexible, expansion) with one line on where it is used.
Sort the tools into the syllabus's own groups: holding, cutting, heating and measuring tools. For each, learn its use and one safety point.
Use the 67-item tools list as a checklist: you should be able to name and recognise each item.
Plumbing work and repair (Units 3 and 4, 27 marks)
Write the steps in order for measuring, cutting, bending and threading a pipe.
For each common fault, learn its cause and how to prevent it.
Practise explaining how to change a tap washer and replace a rusted flange.
Sanitary fitting and masonry (Units 5 and 6, 20 marks)
Make a labelled sketch of a bathroom showing the trap, bend, soil pipe and cistern.
Learn why sanitation matters and how a sanitation system is kept clean.
For masonry, know the tools, how cement mortar is made and how concrete is filled.
Practical and internal assessment
Keep a record of each of the 15 practical tasks as you do them: the August and December assessments are on practical and project work.
Take all four unit tests seriously: together they become 10 marks.
Common mistakes to avoid
Treating the unit tests as practice only: in Plumbing their total is converted to 10 marks of your internal assessment.
Naming a tool without saying what it is used for and the precaution with it.
Mixing up a trap and a bend, or a soil pipe and a waste pipe.
Skipping the small Masonry unit (7 marks): it is short and easy to cover.
Writing repair steps out of order.
Frequently asked questions
How many marks is UP Board Class 10 Plumbing?
The PDF gives 70 marks for the theory syllabus and 30 marks for practical work, and separately lists 30 marks of internal assessment at your school. It does not print a combined total.
Which units carry the most marks?
Plumber's Tools and Equipment and Different Kinds of Plumbing Processes, 15 marks each. Sanitary Fitting and Sanitation has 13, Repair and Maintenance 12, Pipe Joints 8 and Masonry 7.
How many practicals are in the Plumbing syllabus?
15 tasks: 14 numbered and one more, fitting a urinal, printed after them.
Do the Plumbing unit tests count?
Yes. There are four unit tests of 20 marks each, and the total of all four is converted to 10 marks of internal assessment.
When is the UP Board Class 10 Plumbing exam 2027?
Wednesday 10 February 2027, evening shift, 2:00 to 5:15 pm. All 10 vocational trades share this slot.
More for UP Board Class 10
See every UP Board Class 10 subject we cover.
Need a study plan around your weak areas? Book a 30-minute mentorship session.
Download the official UP Board Class 10 Plumbing syllabus PDF
Download the official UP Board Class 10 Plumbing Syllabus 2026-27 PDF from the UPMSP website. The board publishes it in Hindi, with the tools list in English.
Source: Uttar Pradesh Madhyamik Shiksha Parishad (UPMSP), Class 10 Plumber (प्लम्बर) syllabus, session 2026-27: official PDF on upmsp.edu.in. Exam date: UPMSP exam programme 2027. All subjects: upmsp.edu.in/Board_Syllabus.aspx.
Official syllabus: UP Board (UPMSP) publishes the 2026-27 syllabus on its own website. See every subject at upmsp.edu.in ↗ (opens in a new tab) (UPMSP Syllabus 2026-27).
Related free pages
- UP Board Class 10 Punjabi Syllabus 2026-27
- UP Board Class 10 Persian (Parsi) Syllabus 2026-27
- UP Board Class 10 Retail Trading Syllabus 2026-27
- UP Board Class 10 Pali Syllabus 2026-27
- UP Board Class 10 Sanskrit Syllabus 2026-27
- UP Board Class 10 Oriya Syllabus 2026-27
- UP Board Class 10 Science Syllabus 2026-27
- UP Board Class 10 Nepali Syllabus 2026-27



